Electronics Engineering
PCB design, embedded firmware, IoT and consumer / industrial electronics from concept to production.
Engineering built for electronics engineering.
Our electronics team designs boards, firmware and enclosures for startups and OEMs, wearables, industrial controllers, medical devices, smart appliances and RF products. We take responsibility from napkin concept through DFM, EMC certification and first-article production.
- Full product engineering: schematics, PCB, firmware, enclosure and testing.
- Multi-layer, HDI and rigid-flex PCB with signal-integrity discipline.
- Bare-metal, FreeRTOS and Zephyr firmware on ARM Cortex-M, ESP32 and RISC-V.
- Certification support: FCC, CE, BIS, BQB, RoHS.
- Turnkey builds from 5-piece EVT through pilot runs of 1,000+ units.
Talk to a electronics engineering specialist
Share a brief, a domain lead will scope your program and reply with an approach within 48 hours.
Start a ConversationServices tuned for this industry.
PCB Design & Layout
2 to 16-layer boards, HDI and rigid-flex with controlled impedance and length-matching.
Embedded Firmware
Bare-metal, FreeRTOS and Zephyr on ARM Cortex-M, ESP32, Nordic nRF and RISC-V.
IoT Connectivity
Wi-Fi, BLE, LoRa, NB-IoT, LTE-M and cellular with secure cloud provisioning.
Analog & Power Design
LDOs, buck / boost converters, battery management (BMS) and precision signal chains.
RF & Antenna Design
Sub-GHz, 2.4 GHz and 5 GHz RF front-ends with antenna tuning and pre-scan.
EMC Pre-Compliance
In-house conducted and radiated pre-scan before certification lab visits.
Enclosure & Industrial Design
Plastic and sheet-metal enclosures designed for injection moulding or CNC production.
Firmware OTA & Cloud
Secure OTA infrastructure, device management and dashboards on AWS IoT / Azure IoT Hub.
Prototype to Production
Turnkey builds from 5-piece EVT through pilot runs of 1,000+ units with vetted EMS partners.
Focused expertise across the sector.
Wearables & Consumer
BLE wearables, smart-home devices and audio products with tight power and BOM budgets.
Industrial IoT & Gateways
Modbus, CAN, RS-485 gateways and edge controllers for factories and utilities.
Medical Devices
IEC 60601-aware designs, ECG / SpO2 / bio-sensing front-ends and BLE-connected devices.
Automotive Electronics
CAN / LIN modules, telematics, dashboard controllers and EV BMS boards.
Smart Appliances
Wi-Fi + touch UI controllers for kitchen, HVAC and personal-care appliances.
Defence & Aerospace
Ruggedised electronics with wide-temperature, conformal-coated designs.
A predictable four-stage process.
Concept & Spec
We translate your product idea into a signed spec, block diagram and BOM budget.
Design & Prototype
Schematics, PCB, firmware and enclosure delivered as a working EVT unit.
DVT & Certification
Design verification, EMC pre-scan and certification lab coordination for FCC / CE / BIS.
Pilot Production
Vendor selection, first article inspection and pilot run of 100 to 1,000 units.
Deliverables
- ✓Product spec, block diagram and BOM budget
- ✓Schematics and multi-layer PCB Gerbers
- ✓Firmware source with test harness and OTA
- ✓Enclosure 3D model and manufacturing drawings
- ✓EMC pre-scan report and certification dossier
- ✓Assembly instructions and production test jig
Built for this industry.
One Team, One Contract
Hardware, firmware, enclosure and certification under one roof and one delivery owner, no vendor triangulation.
Built for Production From Day One
We design for DFM, DFT and certification from the first schematic, not as a late fix.
First-Pass Certification
In-house pre-compliance scan means most designs clear FCC / CE on their first lab visit.
Long-Life Partnerships
We stay with products through OTA, feature updates and component obsolescence for years post-launch.
Work we've shipped in this space.
Wearable Health Monitor
BLE-enabled ECG patch, schematic, PCB, firmware and FCC/CE certification delivered in 22 weeks.
Industrial IoT Gateway
Modbus-to-MQTT gateway on STM32 running FreeRTOS, 3,500 units shipped into a factory pilot.
Smart Appliance Controller
Wi-Fi + capacitive-touch controller for a kitchen appliance OEM, BIS certified and in mass production.
Numbers that matter.
Tools & platforms we use
Compliance & quality
- ✓FCC Part 15
- ✓CE / EN 300 328
- ✓BIS
- ✓BQB (Bluetooth SIG)
- ✓IPC-2221 / IPC-A-610
- ✓RoHS / REACH
- ✓IEC 60601-aware
Questions we hear often.
Can you take a napkin sketch to production?+
Yes, that's our default engagement. Spec, design, prototyping, certification and pilot manufacturing under one contract.
Do you support post-launch firmware maintenance?+
Yes. We run OTA infrastructure and offer a retainer for feature updates, security patches and bug fixes.
Which volumes do you typically ship?+
We're set up for 100 to 100,000 units per year through our EMS partners. Higher volumes are transitioned to your chosen contract manufacturer.